File Preparation & Requirements
GENERAL PRINT SET UP GUIDELINES
File Preparation & Requirements: Please follow our guidelines. Products personalized incorrectly due to files not meeting our specifications will not be our responsibility, as outlined in our policy. Ensure to follow all instructions.
Individual product requirements are located towards the bottom of the page.
We have two types of templates available for customers.
- Blank Design Templates: Empty templates for a graphic designer to use. Our templates are blank JPEG or PDF images that you can open in any digital image editing program like Photoshop, Illustrator, In-Design, Corel, and more. NOTE: After your final design is ready, turn off or remove the template instructions and dotted lines from your final design. If you do not remove them we will personalize your product with the instructions and guides.
- Pre-Designed Templates: A line of full-fledged design pieces previously designed by our professional graphic design team. These templates can be accessed via our design studio and you can easily swap the preset template information with your information to get professional design in just a few moments.
- FILE FORMAT:
We only accept JPG and PDF.
File Format Exeptions
The exceptions below are very limited and we will reach out to you, in case your order requires them.
- For some variable data products, we will also accept CSV
- For some white ink products or vector-only plotting services, we will also accept AI, TIFF & EPS via EMAIL ONLY.
- For some embroidery products -based on your setup choice- we will also accept DST via EMAIL ONLY.
Occasionally, in response to customer service requests or specific product requirements, we accept PSD, ID, BMP, SVG, and CDR files. Please note that these files cannot be submitted through our online ordering system. Additionally, while we do accept Word and Publisher files, the quality of these files may vary and may not always meet high standards.
- FILE SIZE:
The maximum acceptable combined file size for all uploads using our standard uploader is 145MB.
Anything over 145MB will use our large file uploaded for which free previews are not available.
The maximum acceptable combined file size for all email attachments is 25MB
For extremely large files/corrupt file uploads we may allow you to send a 3rd party link (ex: dropbox, google drive, etc), contact us to ask us how.
- RESOLUTION:
All file formats must have a minimum of 300 dpi (dot per inch) resolution unless we request a vector file. The images designed for the web are done at a low screen resolution of 72 dpi, please do not use anything lower than 300 dpi. Print images need to be created at 300 dpi or there will be a substantial drop in the image quality.
- COLOR MODE:
All color artwork and/or images must be provided in CMYK (cyan, magenta, yellow, black) color mode for most paper and card products, and individual color printing like offset or screen printing must be in spot color.
All black & white artworks and/or images must be provided in grayscale color mode.
Heavy black ink might cause smearing or smudging on ALL products.
- BLEED:
What's a bleed?
Bleed is the portion of the product that will be trimmed off when it is cut to the final size.
Why bleed?
The purpose of a bleed is to continue a color, image, or design to the edge of the product. Due to the possibility of shifting in the trimming process, a bleed is required to ensure that a white line does not show on the edges of your product.
We require ALL files to be built to the full bleed dimension specified for each trim size.
We automatically trim the bleed off of each side, which will result in the desired trim size.
Please build your print-ready digital files by adding the appropriate bleed to your file.
Add 0.125" bleed to each dimension and another 0.125" should be kept within your artwork's final size for the safe zone (or 0.25" bleed on all four sides)
What's a safe zone?
Safe Zone is the portion within the bleed that is used to ensure a flawless printed piece in case the bleed is cut too close which quite often occurs.
All critical elements (text, images, logos, etc.) must be kept at least 0.25" inside the edge or 0.125" inside the bleed line. Anything left close to the edge may be cut off during trimming.
- ROUND CORNERS:
For round corner cards make sure that your bleed is 0.25" + 0.25" for your safe zone.
- CROP MARKS:
Please build your press-ready digital files without any crop marks.
There should be no Lines indicating where the paper should be cut.
- FONTS:
- Fonts must be embedded in PDF files.
- Fonts must be outlined or converted to paths or curves in EPS files.
- Some fonts have copyright restrictions and will not embed in PDF Files.
- Quark Express: Fonts and images must be included with all files submitted. (Mac only)
- BORDERS:
Please allow .125" cutting space around your card. NO BORDERS are recommended, as shifting in the cutting process may make borders appear uneven (view flaws and imperfections section below).
- IMPERFECTIONS & FLAWS
Due to the nature of our printing services and expedited rush printing methods all products whether rush or not tend to have minor imperfections and flaws listed below. Paper printing product deviations, shifting, and cutting can be of up to .25" in any direction.
Napkin printing deviations and shifting can be up to 10 degrees and up to .5" in any direction. Screen printing (shirts, aprons, tote bags, etc.) deviations and shifting can be up to 20 degrees and up to 2" left to right and top to bottom of up to 5".
SPECIAL INSTRUCTIONS
CUSTOM CONTOUR CUTTING:
Click on this link to view contour cutting requirements and file setup instructions https://www.samedayrushprinting.com/custom-cut-instructions.html for all die-cut, kiss-cut, laser-cut, and hand-cut products.
SADDLE STITCH BINDING PRODUCTS
We explain thoroughly how booklets should be printed here https://samedayrushprinting.com/how-to-booklets.html
INDIVIDUAL PRINTING PRODUCT GUIDELINE
- Resolution: 300dpi
- Color Mode: CMYK
- File Type: jpeg, pdf
- Graphic Type: vector(1 color) or raster(full color)
- Final size: 8" x 8"
- Workable Safe Zone Area:7.875" x 7.875"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 8.25" x 8.25"
- Special Instructions: bleed is not required in 1 color jobs, only in full color. Minimum line weight of 10 pixels (recommended 15 pixels).
- Resolution: 300dpi if under 12" x 1 8"
- Resolution: 150dpi over 12" x 18"
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25" all around
- Bleed: .25" all around
- Size with Bleed:
- Special Instructions:vector graphics preferred
- Resolution: 300dpi if under 12" x 1 8"
- Resolution: 150dpi over 12" x 18"
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone:.25" all around
- Bleed:.25" all around
- Size with Bleed:
- Special Instructions:vector graphics preferred
- Resolution:300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 5" x 5"
- Workable Safe Zone Area: 5" x 5"
- Safe Zone: None
- Bleed: None
- Size with Bleed: 5" x 5"
- Special Instructions: Size with Bleed: 5" x 5"
- Resolution:300dpi
- Color Mode: cmyk
- File Type: pdf only
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 2.125" x 3.375"
- Special Instructions:1 pdf with all pages in order from 1st to 2nd ... to last. Bleed requirements are per page and if trimming is required then center where binding will occur will not be trimmed but bleed must still be included as well as safe zone. Specialty products with single color ink or foil stamp must be submitted with 1/8" line thickness. Spiral, Wire, Comb binding need 1/2" safe zone on binding side.
- Resolution:300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:files to be provided as 2 spreads, 1 for front and 1 for back ensure that bleed and safe zone are provided for each panel (for example 1 half fold brochure will have a total of 4 panels)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 2" x 3.5"
- Workable Safe Zone Area: 1.75" x 3.25"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 2.25" x 3.75"
- Special Instructions:for thermography we recommend vector graphics.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:If doing booklets style calendars, 1 pdf with all pages in order from 1st to 2nd ... to last. Bleed requirements are per page and if trimming is required then center where binding will occur will not be trimmed but bleed must still be included as well as safe zone.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector preferred
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions: vector graphics preferred
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed:.25"
- Size with Bleed:
- Special Instructions:you must submit 1 additional file per every side with spot uv besides the two of which will be your print ready press quality files one for the front and one for the back. for the spot uv you can either spot color the 3rd or 4th file or send it as an all black file.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed:.25"
- Size with Bleed:
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions: you must submit 3 or 4 files; two of which will be your print ready press quality files one for the front and one for the back and the 3rd or 4th which will be a mock up of where you want numbering (if any) or perforation (if any) within your prints.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 8" x 8"
- Workable Safe Zone Area:7.75" x 7.75"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 8.25" x 8.25"
- Special Instructions: None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 8" x 8"
- Workable Safe Zone Area: 3"x3"
- Safe Zone: None
- Bleed: None
- Special Instructions: Vector graphics required. All strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of 10 pixels, Lines must be thicker than 18pt Arial bold (you do not need to use Arial but it is a comparison to what a good line thickness is). All outlines must be created as a single shape, do not create multiple objects/shapes and outline them individually when overlapping, must be 1 whole shape outlined. Submit as solid black file (color is dictated upon ordering and has nothing to do with file preparation)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: .5" x 10"
- Workable Safe Zone Area: .25" x 7"
- Safe Zone: None
- Bleed: None
- Special Instructions:Vector graphics required. All strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of 10 pixels, Lines must be thicker than 18pt Arial bold (you do not need to use Arial but it is a comparison to what a good line thickness is). All outlines must be created as a single shape, do not create multiple objects/shapes and outline them individually when overlapping, must be 1 whole shape outlined. Submit as solid black file (color is dictated upon ordering and has nothing to do with file preparation)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:5"x5"
- Workable Safe Zone Area:4.75"x4.75"
- Safe Zone:.25"
- Bleed:.25"
- Size with Bleed:5.25"x5.25"
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 4.25" x 9.5"
- Workable Safe Zone Area: 3.75" x 9"
- Safe Zone: .5"
- Bleed: none
- Size with Bleed: none
- Special Instructions:if you require bleed please ask your sales representative for a special template and the upgraded cost for bleed.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:None
- Resolution:300dpi
- Color Mode: cmyk
- File Type: pdf only
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone:.25"
- Bleed:.25"
- Size with Bleed:
- Special Instructions:vector graphics required. all strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of 10pixels (recommended 15 pixels).
- Resolution:300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Special Instructions:Special Instructions: each fold over card consist of 4 panels if printing both sides or 2 panels if printing single sided. ensure that each panel has the bleed/safe zone required above, even if its on the fold line.
- Resolution:300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 9" x 12"
- Workable Safe Zone Area: view temple
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: view temple
- Special Instructions:view temple. printing is only allowed on the outside park of folders and on the front part of pockets.
- Resolution:300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:you must submit 3 files; two of which will be your print ready press quality files one for the front and one for the back and the 3rd which will be a mock up of where you want your hole within your prints.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 2" x 3"
- Workable Safe Zone Area:1.75" x 2.75"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 2.25" x 3.25"
- Special Instructions:Minimum line weight of 10pixels (recommended 15 pixels).
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 8.5" x 11"
- Workable Safe Zone Area:8.25" x 10.75"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 8.75" x 11.25"
- Special Instructions:for optimal results, light coverage recommended
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 1.5" x 1"
- Workable Safe Zone Area: 1.25" x .75"
- Safe Zone: .125"
- Bleed: None
- Internal Code: mss69lc
- Special Instructions:Vector graphics required. All strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of 10 pixels, Lines must be thicker than 18pt Arial bold (you do not need to use Arial but it is a comparison to what a good line thickness is). All outlines must be created as a single shape, do not create multiple objects/shapes and outline them individually when overlapping, must be 1 whole shape outlined. Submit as solid black file (color is dictated upon ordering and has nothing to do with file preparation)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Ink Coverage: Under 25%
- Final size: 1.5" x 1"
- Workable Safe Zone Area: 1.25" x .75"
- Safe Zone: .125"
- Bleed: .125"
- Internal Code: ijs33lc
- Special Instructions: No solid areas or color floods
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector preferred
- Final size: 3.5" x 3.5"
- Workable Safe Zone Area:3.25" x 3.25"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 3.75" x 3.75"
- Special Instructions: we recommend light coverage 7 vector when ava.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed:.25"
- Size with Bleed: 2.25" x 3.75"
- Special Instructions:vector graphics preferred
- Resolution: 300dpi
- Color Mode: cmyk
- File Type:pdf only
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone:None
- Bleed:None
- Size with Bleed:
- Special Instructions:vector graphics required. all strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of .25 inch (recommended 0.5 inches). all outlines must be created as a single shape, do not create multiple objects/shapes and outline them individually when overlapping, must be 1 whole shape outlined.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 4" x 12"
- Workable Safe Zone Area:3.75" x 11.75"
- Safe Zone: .25"
- Bleed: .25"
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 1.5" x 4.5"
- Workable Safe Zone Area:1.25" x 4.25"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 1.75" x 4.75"
- Special Instructions: None
- Resolution: 300dpi if under 12" x 1 8"
- Resolution: 150dpi over 12" x 18"
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25" all around
- Bleed: .25" all around
- Size with Bleed:
- Special Instructions:vector graphics preferred
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:3"x3"
- Workable Safe Zone Area:2.75x2.75"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:3.25"x3.25
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: .5" x 10" (snap extends up .75" and is not printable)
- Workable Safe Zone Area: .25" x 3"
- Safe Zone:None
- Bleed:None
- Special Instructions:Vector graphics required. All strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of 10 pixels, Lines must be thicker than 18pt Arial bold (you do not need to use Arial but it is a comparison to what a good line thickness is). All outlines must be created as a single shape, do not create multiple objects/shapes and outline them individually when overlapping, must be 1 whole shape outlined. Submit as solid black file (color is dictated upon ordering and has nothing to do with file preparation)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed
- Special Instructions: none
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:Minimum line weight of 10pixels (recommended 15 pixels).
- Resolution:300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 2.25" diameter circle
- Workable Safe Zone Area:2" x 2"
- Safe Zone:.25"
- Bleed:.75"
- Size with Bleed: 3" x 3" square
- Special Instructions:we recommend you use the template for this product as the bleed must be provided as a square rather than a circle.
- Resolution:300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:2.125" x 3.375"
- Workable Safe Zone Area:2" x 3.25"
- Safe Zone: .25"
- Bleed: not available for this product
- Size with Bleed: 2.125" x 3.375"
- Special Instructions:since bleed is not allowed, there will be a slight empty border all around the cards that can be of up to .125". Keep in mind heavy ink & full ink coverage not recommended. Keep ink coverage at under 35%. Full bleed not available. Maximum distance from edge approx 1/6 to 1/8"
- Resolution:300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:
- Resolution: 300dpi if under 12" x 1 8"
- Resolution: 150dpi over 12" x 18"
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:vector graphics preferred
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk/spot/pantone
- File Type: pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:vector graphics required.
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Special Instructions: Submit as solid black file (color is dictated upon ordering and has nothing to do with file preparation)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 1.5" x 0.75"
- Workable Safe Zone Area: 1.25" x 0.5"
- Safe Zone: .125"
- Bleed:None
- Special Instructions: Vector graphics required. All strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of 10 pixels, Lines must be thicker than 18pt Arial bold (you do not need to use Arial but it is a comparison to what a good line thickness is). All outlines must be created as a single shape, do not create multiple objects/shapes and outline them individually when overlapping, must be 1 whole shape outlined. Submit as solid black file (color is dictated upon ordering and has nothing to do with file preparation)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed:.25"
- Size with Bleed:
- Special Instructions:files to be provided as 2 spreads, 1 for front and 1 for back ensure that bleed and safe zone are provided for each panel (for example 1 half fold brochure will have a total of 4 panels)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 9" x 8"
- Workable Safe Zone Area:8.75" x 7.75"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 9.25" x 8.25"
- Special Instructions: None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 3" x 8.5"
- Workable Safe Zone Area:
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 3.25" x 8.75"
- Special Instructions: None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: 8" x 8"
- Workable Safe Zone Area:7.75" x 7.75"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed: 8.25" x 8.25"
- Special Instructions: None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size:2"x2"
- Workable Safe Zone Area:1.75"x1.75"
- Safe Zone: .25"
- Bleed: .25"
- Size with Bleed:2.25"x2.25"
- Special Instructions:None
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: .5" x 10" (snap extends up .75" and is not printable)
- Workable Safe Zone Area: .25" x 3"
- Safe Zone:None
- Bleed:None
- Special Instructions:Vector graphics required. All strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of 10 pixels, Lines must be thicker than 18pt Arial bold (you do not need to use Arial but it is a comparison to what a good line thickness is). All outlines must be created as a single shape, do not create multiple objects/shapes and outline them individually when overlapping, must be 1 whole shape outlined. Submit as solid black file (color is dictated upon ordering and has nothing to do with file preparation)
- Resolution: 300dpi
- Color Mode: cmyk
- File Type: jpeg, pdf
- Graphic Type: vector or raster
- Final size: .5" x 8"
- Workable Safe Zone Area: .25" x 2"
- Safe Zone:None
- Bleed:None
- Special Instructions:Vector graphics required. All strokes or outlines are to be converted into objects. Only use even straight lines, curves, and shapes. Minimum line weight of 10 pixels, Lines must be thicker than 18pt Arial bold (you do not need to use Arial but it is a comparison to what a good line thickness is). All outlines must be created as a single shape, do not create multiple objects/shapes and outline them individually when overlapping, must be 1 whole shape outlined. Submit as solid black file (color is dictated upon ordering and has nothing to do with file preparation)